Autoclaved Aerated Concrete plant AAC Cutting Machine , Vertical cutting machine

Vertical cutting machine

Description:

JQF-6.0 Autoclaved aerated concrete cutting machine is one of JQF-6.0 series product. It is a constant cutting developed from moving cutting. The machine is composed of longitudinal (horizontal) cutting machine, transverse (vertical) cutting machine, cutting trolley, hydraulic jacking device and guide rail. And, the vertical cutting machine has been modified from fixed swing, spring tension to frame swing and cylinder tension. Using frame swing increases the contact surface and life of steel wire; and using cylinder tension removes the deform defect of spring tension which also improves the cutting accuracy.

1. Cutting Conditions

When the casted mould blank is turned 90 degree in the air and lifted on the cutting cart, after de-mould and being moved to the work section of horizontal cutting machine and vertical cutting machine by first cutting cart, it will be cut from six surfaces. First, it will be cut 4 surfaces horizontally by the longitudinal cutting machine, and then it will be moved to the transverse cutting machine by the first trolley. After the hydraulic jacking device lifts the mould blank, the first cart will be back to original location and ready for next blank. Meanwhile, the second cutting cart is moving under the vertical cutting machine. The blank will be put down on the second cutting cart by hydraulic jacking device and cut by vertical cutting machine. After finished cutting, the blank will be moved by the same cart under the semi-finished product sling and hanged on the steam trolley by the sling. In the same time, the next mould blank is under cutting moved by the first cutting cart. The cycle time is about 4 minutes.

1. Single machine function

See vertical cutting machine (Drawing 2). It cuts the both end of the mould blank. The length will be determined base on the requirement, and it will cut vertically from upper to bottom in the center of the blank base on the thickness requirement.

Technical specifications

• Vertical cutting machine
• The maximum external dimension
• Length:7070mm   Width:3205mm   Height:3755mm
• Weight:7150 kg
• Vertical cutting reducer
• Type:  K87S-22YEJ-5.5-B31   QTY:1 PC
• Install type:  B31
• Gear ratio:  i=22
• Matched motor
• Type:  Y132S-4       QTY:1 PC
• Power:  5.5KW
• Rotation speed:  1450 r/min
• Rise and down time: Single stoke~100/s<
  Autoclaved Aerated Concrete plant AAC Cutting Machine , Vertical cutting machine